Application

It is suitable for radiography inspection of the human head, chest, abdomen, pelvis and other parts.

Function

The device is composed of a column, a carriage, a bucky (a bucky that can be pulled out of the device in the box), a balance device, and other parts. It can be adapted to different sizes of ordinary X‑ray film cassettes and CR IP boards. And DR flat panel detector.

Main technical parameters

1. The maximum travel of the bucky is 1100mm;
2. The width of the card slot is suitable for boards with a thickness of less than 19 mm;
3. The upper edge of the bucky is 1800 mm from the highest position and 700 mm from the lowest position on the ground; The center of bucky (14″ ×14″) from the ground: highest position 1570 mm, lowest position 470 mm;
4. Suitable size of clip: 5 ” × 7″ ‑ 14 ” × 14″;
5. Filter grid (optional): ‑ Grid density: 40 lines / cm; ‑ Grid ratio: 10: 1 ‑ Convergence distance: 180cm.

Installation & optional configuration

The bucky is Front installation / right side, and the mobile base can be selected to become a mobile bucky stand (NK14DY type). Size of mobile base: 70 × 46 × 11 cm.