Newheek manufacture X-ray UC arms

HomeU arm›X-ray U Arm

    X-ray U-arm

X-ray U Arm

  • Cheap maintain cost

    Super image chain, output perfect image

    Professional IT image collection software to ensure super image

    Ensure the machine working stable under complex environment and high quality image

    Low dose x ray requirement reduce the radiation harm greatly

  • Email

X-ray U Arm


Properties: Medical X-ray Equipments & Accessories
Brand Name: NEWHEEK
Model Number: U200
Product Name: X-ray U Arm
Place of Origin: Shandong, China (Mainland)
Power supply: three phase 380V±10%
U arm stroke:1200mm±20mm
SID stroke:1000mm~1800mm

Advantages
Medical X-ray U arm with smart outlook, high precise mechanical performance, widely check up body parts. It can automatically to adjust the flat panel detector height according to actual check up body part.
It can be matched with the different kinds of radiography tables freely.
Medical X-ray U arm machine with two functions about resetting and rotate protection. It can preset three positions into the machine, and press the three resetting key the system will move to the positions you preset. When the U arm is at a lower position, it can press the key to rotate it. It will not rotate. Then run up it to a higher position, it will work. This function is to protect the machine from topple and fall because of the UC arm touch the ground when it rotates.
Super image chain to get perfect image. Special IT image workstation software realizes real time image collect, storage, processing, print and transfer etc function.
Adopt a-SI flat panel detector, with stable performance and reduce x ray dose in greatly extent.

X-ray U-arm and x ray table
Highlight
Perfect Image
* Super image chain, output perfect image
* Professional IT image collection software to ensure super image
Stable and Credible
* FPD flat panel detector
* Ensure the machine working stable under complex environment and high quality image
* Low dose x ray requirement reduce the radiation harm greatly
* Cheap maintain cost

Stand Configuration
X-ray U-arm Stand Configuration

Specification
Power Supply
Power supply: three phase 380V±10%;Power frequency: 50Hz±1Hz; I.R.: ≤0.2 Ω; Power capacity: ≥55KVA; Grounding resistance: ≤2 Ω

X Ray HV Generator
Max output power 50kVA (tube voltage: 100kV; tube current: 500mA); Tube current adjustment range: 25mA~630mA, load time adjustment range: 1.0m~6300ms, tube current time product adjustment range: 0.1mAs~6630mAs

X Ray Tube
30.50KW/125KV, bifocus 1.0/2.0, Anode Heat Capacity140KJ

Collimator
Manual,SID=100cm, light field of view brightness >160lux, Illumination ratio>4:1, light 24V/150W, field of view light time:30s; multi shielding leaves

UC ARM
U arm up and down stroke:1200mm±20mm; The lowest position of U arm to ground: 480mm±20mm; U arm rotation:-30°~120°; Detector rotation:-45°~+45°; SID stroke:1000mm~1800mm

Flat Panel Detector
Detector technology: Amorphous Silicon; Scintillator: GOS/CSI; Active area: 14”×17”; Pixel pitch: 150μm; Limiting resolution: 3.3Lp/mm; Number of pixels: 2304×2800; AD conversion: 14 bit; Gray scale: 16384 gradation; Data interface: Gigabit Ethernet; Full image acquisition time: Approx.5s after X-ray exposure

Image Workstation System
image collect, storage, processing, print and transfer etc function.

X-ray U-arm img
X-ray U-arm accessory
X-ray U-arm control

Newheek Advantages:
Original manufacturer of x-ray machine and accessories for more than 16 years.
√ Customers could find all kinds of x-ray machine parts here.
√ Offer on line technological support.
√ Promise super product quality with best price and service.
√ Support the third part inspection before delivery.
√ Ensure the shortest delivery time.


Contact Us If you need to order the X-ray U arm
Email : service@newheek.com
Hot Line : 86 536 8882360

FAQ
The common problems on the X-ray U arm
1. How many types of the X-ray U arm machines in NEWHEEK?
Newheek has two types of X-ray U arm. Model U200 X-ray U arm machine and Model U300 X-ray U arm machine.
2. What is the Payment Method ?
We could accept payment by TT, Western Union, Visa Credit Card, Paypal etc.
3. How long is the Lead Time?
Within 15 workdays for X-ray U arm after receipt of payment.
4. How to order our X-ray U arm?
Please contact us with service@newheek.com


Previous: The First Post


(+86) 18953679166
service@newheek.com