The X-ray U arm has an intelligent appearance, high-precision mechanical properties, and extensive inspection of body parts. The height of the flat panel detector can be automatically adjusted according to the actual inspection site.
The X-ray U arm has both reset and rotary protection. It can be preset to three positions to enter the machine, and press the three reset button, the system will move to your preset position. When the X-ray U arm is in the lower position, it can turn it by the key. It won’t rotate. Then run to a higher location and it will work. This feature is to protect the machine from tipping because the X-ray U arm touches the ground while rotating.
It contains a super image chain for a perfect image. The special IT image workstation software enables real-time image acquisition, storage, processing, printing and transmission.
With a-Si flat panel detector, the performance is stable and the X-ray dose is greatly reduced. The X-ray U arm can be used with the NK-T3 film bed. The film bed is made of plexiglass, and the whole film bed can be moved and controlled by the foot brake. The X-ray U arm can be configured with or without a film bed.
Tel: +86 18953679166
Email : service@newheek.com
Company : Weifang Newheek Electronic Technology Co., Ltd.