Newheek manufacture X-ray UC arms

HomeBlog ›X-ray parts for U-arm machine

X-ray parts for U-arm machine

Alina 3月 19, 2020

Today, I will introduce you to the Newheek X ray machine of Uarm. We all know that the Uarm consists of many components, mainly high-voltage generators, bulbs, beam limiters, high-voltage cables, grids (optional) and mechanical parts. Today, I will introduce you to the high-voltage cable used on the Uarm. Newheek currently has three manual limiters and an electric limiter, and we use the manual limiter L03 for the Uarm.

Is it possible to use a flat panel detector for the X-ray U arm machine
Simply tell everyone about the radiology table we have for Uarm. Because there are bucky on the Uarm, so the x ray table that we usually configure for the customer is generally a simple x ray table.
Today I will give you a brief introduction to Newheek x ray collimator 202:

75KV 6m high voltage cable for X-ray U arm machine X-ray machine
The suitable x ray tube max voltage: 150 kV
Max irradiation field: SID (FFD) = 1000mm hours, no less than 430 mm x 430 mm
Min irradiation field: 0x0 mm
Inherent filter: 1 mm·Al/75kVp
Additional filter: 1 mm·Al and 2 mm·Al
Lead leaf control mode: manual
Working power: 24V AC/DC, 150 W (The lowest safe voltage)

(+86) 18953679166