Maintenance and repair of U-arm X-ray machine

Newheek-Uarm 2月 08, 2022

Maintenance and repair of U-arm X-ray machine

One is daily maintenance.
It is carried out by the user. Before going to work or after get off work every day, clean the surface of the machine to remove dust and decontamination, and keep the machine and the machine room clean and dry. There should be as little or no sundries stacked as possible in the computer room.
The second is regular maintenance.
The maintenance personnel shall cooperate with the maintenance personnel to regularly check the fixed connection of various electrical appliances and mechanical components, clean and dedust, oil and rust (it should be noted that oil is strictly prohibited from contacting high-voltage cables).
Check the operation of the machine, and use instruments to check the parameters if necessary. For X-ray machines that have not been used for a long time, various inspection and training of the machine should be carried out before use. It is unavoidable to have failures in the use of the X-ray machine. Once a failure occurs, it should stop working immediately, report to professional maintenance personnel, find out the cause of the failure, repair and eliminate it in time, and restore the machine to a better performance state as much as possible to avoid small problems. Do not cause a catastrophe phenomenon. Make detailed records on the daily use of the machine and the repair situation after failure, so as to keep abreast of the performance status of the machine.
The maintenance of the U-shaped X-ray machine is very important, and maintenance of the equipment will be avoided.