Newheek manufacture X-ray UC arms

HomeBlog ›How to maintain the U-arm X-ray machine

How to maintain the U-arm X-ray machine

Newheek-Uarm 3月 02, 2023

Partners who buy U-shaped arms should not forget to maintain and maintain them while using them carefully. Let’s teach you how to maintain and maintain U-shaped arms

First, daily maintenance.

It is carried out by the user. Before or after work every day, clean the surface of the machine to remove dust and dirt, and keep the machine and machine room clean and dry. The machine room shall be stacked as little or no sundries as possible.

Second, regular maintenance.

The maintenance personnel shall cooperate with the designated maintenance personnel to regularly check the fixed connection of all electrical and mechanical parts, clean and remove dust, and oil and remove rust (it shall be noted that oil is not allowed to contact with high-voltage cables).

Check the operation of the U-arm X-ray machine, and calibrate all parameters with instruments and meters if necessary. For the X-ray machine that has not been used for a long time, the machine should be tested and trained before use. The failure of the X-ray machine in use is inevitable. Once the failure occurs, it should be stopped immediately, reported to the professional maintenance personnel, find out the cause of the failure, repair and eliminate it in time, so that the machine can recover to a better performance state as far as possible, and avoid the phenomenon of causing a big disaster due to minor inaction. Make detailed on-file records of the daily use of the machine and the repair after the failure, so as to grasp the performance status of the machine at any time.

The above is the maintenance and repair of U-shaped arm. If you need, please consult! Tel: +8617616362242

(+86) 18953679166