Newheek manufacture X-ray UC arms

HomeStationary X-ray Machine›Bucky Stand‑Side Mounted NK17SG‑NK17SY Product

Bucky Stand‑Side Mounted NK17SG‑NK17SY Product

+86 17616362240

aide@newheekxray.com

The NK17SG‑NK17SY side‑mounted bucky stand is a professional vertical radiographic accessory designed for general human radiography. It supports imaging for human head, chest, abdomen, pelvis and other anatomical regions, widely deployed in hospital radiology departments and diagnostic clinics. Featuring side‑pull‑out film cart structure, this bucky stand works compatibly with conventional X‑ray film cassettes, CR IP boards and DR flat‑panel detectors of various sizes.

Mechanical assembly consists of vertical column, sliding carriage, side‑out bucky film cart and balancing device. The bucky delivers a maximum travel of 1110 mm for flexible height adjustment. The upper edge of the bucky ranges from 700 mm at lowest position up to 1800 mm from ground. For 17”×17” cassette, its center point adjusts between 470 mm and 1570 mm above ground, covering imaging needs for pediatric to adult patients.

The card slot accommodates boards with thickness under 19 mm. Compatible clip sizes cover 5”×7” to 17”×17”, fitting most mainstream radiographic media formats. Users can select an optional filter grid to suppress scattered radiation and sharpen image quality. The optional grid comes with 40 lines/cm density, 10:1 grid ratio and 180 cm convergence distance, greatly improving radiographic clarity for thick body parts.

This side‑mount bucky stand offers two installation variants. The film cart can be configured for left‑side or right‑side output to match different room layout requirements. If mobility is required, customers may add the optional mobile base to convert it into NK17SY mobile bucky stand. The mobile base dimension is 70 cm × 46 cm × 11 cm, allowing easy movement between examination rooms.

Built for heavy‑duty clinical environment, NK17SG‑NK17SY side‑mounted bucky stand adapts for both analog film‑based workflow and modern digital DR / CR systems. Flexible side‑out structure, broad height adjustment and optional mobile base make it a practical upgrade or new‑build solution for radiology suites.

https://www.xrayuarm.com/fixed-x-ray-machine/

Item Specification
Model NK17SG‑NK17SY
Max travel of the bucky 1110 mm
Applicable board thickness <19 mm
Bucky upper edge height range 700 mm‑1800 mm
17”×17” cassette center height 470 mm‑1570 mm
Suitable clip size 5″×7″‑17″×17″
Optional filter grid density 40 lines/cm
Optional filter grid ratio 10:1
Optional filter grid convergence distance 180 cm
Mobile base dimension(NK17SY) 70 cm × 46 cm × 11 cm




(+86) 17616362240
newheek1999@outlook.com
Online Customer Service